UPDATE: Currently on-hold \/ cancelled.<\/p>\n
Some initial\u00a0sketches. I’m trying to use the existing workhorse\u00a0Intimidator 5 as a booster by replacing the nose cone with an inter stage coupler. Re-using the I5\u00a0makes it a bit more difficult getting the whole rocket\u00a0stable. It requires two new 98mm motors of which I recently\u00a0stumbled upon some\u00a0suitable phenolic\u00a0casting tubes.<\/p>\nngg_shortcode_0_placeholder\n
Initial sims indicate apogee at +\/- 6,5km with a 98mm, 8G KNSB – 9500Ns motor in the sustainer and a 98mm, 6G KNDX – 7300Ns motor in the booster. It’s a bit contradicting putting the bigger motor in the sustainer but otherwise I was unable to get it stable.<\/p>\nngg_shortcode_1_placeholder\n","protected":false},"excerpt":{"rendered":"
UPDATE: Currently on-hold \/ cancelled. Some initial\u00a0sketches. I’m trying to use the existing workhorse\u00a0Intimidator 5 as a booster by replacing the nose cone with an inter stage coupler. Re-using the I5\u00a0makes it a bit more difficult getting the whole rocket\u00a0stable. It requires two new 98mm motors of which I recently\u00a0stumbled upon some\u00a0suitable phenolic\u00a0casting tubes. Initial<\/p>\n